Emulsifiable Tar Remover


A powerful asphalt and tar remover that is ready to use. A solvent based formulation designed for fast action on contact with asphalt and tar.

Technical Information

Appearance: Tan Clear Liquid Solubility: Emulisifable
Density: 6.70 Lbs./Gal. pH Level: 7 (when emulsified)
Odor: Mild Solvent Foaming: Some
Flash Point: 105oF Stability: Stable


Apply by brushing on and allow to penetrate until tar is soft. Follow up with a pressure wash of water to flush away deposits. Can be used on vertical and horizontal surfaces. Recommended for use on: concrete, brick, masonry, metal (unpainted), ceramic tile, aluminum, paving equipment, trailers, heavy construction equipment, tools, trucks, sidewalks, curbs and roofing. Apply with mops, brushes or pressure sprayers. For spot removing on cars, apply to a rag and wipe tar spots off. Wash car after spot is removed.

Material Safety

Contains mineral spirits. Combustible liquid, keep away from heat, sparks and flame. Avoid contact with painted and finished surfaces. Avoid contact with skin and eyes. Use in well ventilated areas.

[Back to Section 2 - Concrete And Masonry Maintenance Products - Miscellaneous]