Graffiti Remover


Thick, clinging, methylene chloride based stripper. Works on varnish, graffiti, urethane, epoxies, and other paints from wood, metal, brick, and other surfaces. Non flammable, non acid, and non caustic.

Technical Information

Appearance: Viscous Yellow Liquid Odor: Strong characteristic
Solubility: Emulsifiable Stability: Stable
Density: 12 Lbs./Gal. pH: 11
Flash Point: None


Scrape or pressure wash loose debris then apply the Graffiti Remover with a nylon brush or airless sprayer. Covers approximately 50 square feet per gallon. Allow stripper to work for at least 15 minutes. Remove with high pressure water rinse.

Material Safety

Irritation to eyes, skin and mucous membranes. Wear goggles, neoprene gloves. Keep off skin and clothing and avoid breathing vapors. Contains Dichloromethane

Keep away from heat and open flame. Do not take internally. Vent bung before opening drum or container. Close container after each use. DO NOT use in confined areas.

[Back to Section 2 - Concrete And Masonry Maintenance Products]