Heavy Duty Restoration
A strong general purpose cleaner designed for cleaning concrete surfaces where a moderate to strong etching cleaner can be used. Always run a test to make sure that the proper dilution is being used for the desired effect. Designed to be used by experienced personnel familiar with the use of acidic cleaners.
|Appearance: Dark Clear Liquid||Odor: Strong Acid & Pungent|
|Solubility: 100%||Stability: Stable|
|Density: 9.48 Lbs./Gal.||pH: <1|
|Flash Point: None||Rinsing: Complete|
Typical dilution is 9 parts water to 1 part Heavy Duty Restoration. Always add acid to water, never water to acid. Prewet a large area of the concrete surface to be cleaned. Apply diluted cleaner with a soft fiber masonry brush. Allow a dwell time of 1 to 2 minutes. Rinse thoroughly with high pressure spray equipment.
Corrosive. Can cause burns. Contains Hydrofluoric Acid, Sulfuric Acid. Avoid contact with skin, eyes or clothing. Do not take internally. For industrial use only. When handling this product, wear goggles, respirator, apron and rubber gloves. Make sure that rubber gloves do not have pinholes in them. Contact with concentrate will cause immediate burning sensation; however, diluted solutions may not cause burning, redness or pain until several minutes or hours have elapsed. Use care when handling this product. Will etch glass. To be used by trained professionals only.
[Back to Section 2 - Concrete And Masonry Maintenance Products]