Limestone Cleaner


A blend of emulsifiers and alkalines to remove dirt and grime from limestone buildings and other limestone structures with a pressure washer. Works great on limestone where an acid cleaner would discolor the surface.

Technical Information

Appearance: Amber Clear Liquid Solubility: 100%
Density: 9.0 Lbs./Gal. pH Level: 14
Odor: Mild Rinsing: Complete
Flash Point: None Stability: Stable
Foaming: Moderate Wetting Ability: Excellent


Dilute Limestone 3:1 with water. Spray over surface to be restored and allow a ten minute dwell time. Pressure wash off with water. For very dirty surfaces, use at a lesser dilution.

Material Safety

Alkaline Material. Avoid contact with skin and eyes in concentrated form. Wear gloves and goggles when mixing. If contact is made, flush with water. Keep container closed when not in use. Avoid storage in freezing temperatures. Rinse drum before discarding. Keep out of reach of children.

[Back to Section 2 - Concrete And Masonry Maintenance Products]