Porcelain and Grout Cleaner
Description
Regular use of Porcelain and Grout Cleaner will eliminate accumulations of rust, lime soap deposits and grout encrustation's and leave surfaces sparkling bright and with a pleasant scent. Powerful and fast acting on unsightly stains and deposits, but will not harm fixtures. Use for regular cleaning of ceramic tile, porcelain, stainless steel fixtures, drinking fountains, shower stalls and bathtubs. This product is safe on all acid resistant porcelain, tile, enamels and most metal surfaces. Do not use on marble, terrazzo or aluminum.
Technical Information
| Appearance: Pink Liquid | Solubility: 100% | |
| Solids: 14% | Odor: Mild | |
| Density: 8.7 Lbs./Gal. | pH Level: 1 | |
| Stability: Good | Flash Point: None |
Directions
Toilet cleaning: Remove water from bowl. Saturate mop with cleaner and swab bowl including under rim at water outlets. Flush and rinse mop.
Urinals: Hold mop over trap and saturate with cleaner. Swap all surfaces including water outlets. Remove screen and pour 3 to 5 ounces of cleaner in drain. Let stand approximately 3 minutes then swab drain and replace screen. Flush and rinse mop.
Bathtubs, Wash Basins, Shower Stalls, Drinking Fountains: Dilute Porcelain and Grout Cleaner with 3 parts water and clean the surface; rinse well with water when completed.
Stainless Steel Equipment: To clean counter tops and refrigerators dilute with 3 parts water and clean. Rinse well with water and follow with a dry cloth to polish.
Material Safety
Contains Phosphoric Acid. Avoid prolonged or repeated contact with skin and eyes. For skin contact flush with water. For contact with eyes flush with water for at least 15 minutes and seek medical attention.
[Back to Section 2 - Concrete And Masonry Maintenance Products]