Scum & Lime Remover
Description
Scum and Lime remover dissolves and removes rust, scale, lime corrosion, excess concrete, soap scum, mortar, and water minerals deposits. Scum and Lime remover is concentrated and should be diluted prior to use. Some of Scum and Lime Remover can be used to clean water meters, concrete cleaning, swimming pools, tile and grout, air conditioner coils, gas meters, drinking fountains, heat exchangers, showers, hospitals and food service surfaces.
Technical Information
| Appearance: Clear Liquid | Odor: Mild | |
| Solubility: 100% | Stability: Stable | |
| Density: 10.0 Lbs./Gal. | pH: <1 | |
| Flash Point: None | Foaming: Moderate |
Directions
For removing scale, oil, dirt and rust: For heavy build up dilute with 5 parts water. For light build up dilute with up to 20 parts of water.
Automatic Dishwashers: Use 4 ounces Scum and Lime Remover per gallon water. Apply to rinse tank of dishwasher and run for 15 minutes. Drain and follow with dish washing detergent. Drain and rinse again.
Material Safety
Contains Phosphoric Acid. Avoid prolonged or repeated contact with skin and eyes. For skin contact flush with water. For contact with eyes flush with water for at least 15 minutes and seek medical attention.
[Back to Section 2 - Concrete And Masonry Maintenance Products]