Acrylic Floor Finish (25%)


Acrylic Floor Finish can be safely used on any floor surface not normally harmed by water. It produces a high gloss colorless film that is durable, resists scuffing and retains gloss under scrubbing. Even with this resistance and toughness, it is easily unlocked and removed using an ammoniated stripper.

Technical Information

Appearance: White Emulsion Water Spot: None (After 1 Hour)
Solids: 25% Odor: Mild
Density: 8.46 Lbs./Gal. pH Level: 9.2
Stability: Good Flash Point: None
Dry Time: 20 – 30 Minutes


Thoroughly scrub floor using a quality stripper. Remove solution before it has a chance to dry. Apply Acrylic Floor Finish with a mop or applicator. It will spread evenly and dry to a beautiful gloss that will last for several buffings. For first time usage 2 coats are recommended. This finish is keyed to ammonia removal. Do not use ammonia containing cleaners for general maintenance. Maintain floor between strippings by mopping with a solution of 1 part Acrylic Floor Finish and 2 parts of water.

Material Safety

Keep from freezing.

[Back to Section 4 - Custodial and General Maintenance Products - Waxes]