Floor Seal


Floor Seal can be safely used on any floor surface not normally harmed by water. It produces a high gloss colorless film that is durable, resists scuffing and retains gloss under scrubbing. Even with this resistance and toughness, it is easily unlocked and removed using an ammoniated stripper.

Technical Information

Appearance: White Emulsion Solubility: 100%
Solids: 25% Odor: Mild
Density: 8.44 Lbs./Gal. pH Level: 9.0
Stability: Good Residual Monomer: Less than 0.5%
Flash Point: None


Thoroughly scrub floor using a quality stripper. Remove solution before it has a chance to dry. Stripper must be neutralized before application of the Floor Seal. Apply Floor Seal with a mop or applicator. It will spread evenly and dry to a beautiful gloss that will last for several buffings. For first time usage 2 coats are recommended. This finish is keyed to ammonia removal. Do not use ammonia containing cleaners for general maintenance. Maintain floor between strippings by mopping with a solution of 1 part Floor Seal and 2 parts of water.

Material Safety

Keep from freezing.

[Back to Section 4 - Custodial and General Maintenance Products - Waxes]