Metal Roof Rust Remover


A very good rust remover for metal roofs and other metal surfaces.

Technical Information

Appearance: Clear liquid Odor: Mild
Solubility: 100% Stability: Stable
Density: 10.40 Lbs./Gal. pH: <1
Flash Point: None Rinsing: Complete


Scape of brush rust before use. Diute 10 to 25 to 1 with water. Apply by hand sprayer or with a pressure washer. Allow a 5 to 10 minute dwell time. Rinse with water. Repeat as necessary.

Material Safety

Contains phosphoric acid.  Can cause severe burns to skin, eyes, and internal organs. For industrial use only by trained personnel. Avoid contact with skin, eyes, and clothing.  Do not take internally. Protective clothing such as goggles, face mask, rain suit, and rubber gloves must be worn.  Check gloves to insure no pin holes are present.  Contact with diluted material cleaner may not cause immediate pain, redness, or burning until several minutes have elapsed.

[Back to Section 7 - Metal Cleaning, Maintenance and Paint Removal Products - Rust Control]