Petroleum Safety Solvent
Petroleum Safety Solvent is a highly refined petroleum solvent with a high flash point specially developed from removing grease and oil from equipment.
|Appearance: Clear Liquid
|Density: 6.53 Lbs./Gal.
|pH Level: NA
|Odor: Mild Solvent
|Flash Point: 140oF
Petroleum Safety Solvent should be used at full strength. Application methods include brushing on or dipping parts into solvent. After application and brief soaking period, dry the surface with compressed air. A water rinse is not required. Petroleum Safety Solvent is an excellent replacement for kerosene and mineral spirits. It contains no chlorinated solvents and has hundreds of uses. It can be used to clean motors, switches, panels, wiring and other electrical equipment. Recommended for use on metal parts subject to accumulations of oil or grease where the use of water solutions for cleaning is not permitted.
In handling Petroleum Safety Solvent, take normal precautions employed with hydrocarbon solvents. Use this product only in well ventilated areas and see that workers avoid prolonged breathing of vapors and repeated contact with skin. Avoid sparks and open flames.
[Back to Section 7 - Metal Cleaning, Maintenance and Paint Removal Products - Cleaners]