Dry Gas


Dry Gas is a concentrated solvent blend that quickly and effectively removes water from gasoline and fuel lines. Prevents gasoline lines from freezing and carburetor icing. Suitable for use in automobiles, trucks, buses, school buses and all gasoline powered vehicles and machinery.

Technical Information

Appearance: Clear Liquid Solubility: Soluble
Density: 6.6 Lbs./Gal. pH Level: NA
Odor: Strong Alcohol Foaming: None
Flash Point: 52oF Stability: Stable


For maximum protection, add 12 ounces of product to fuel tank per 10 gallons of gasoline to prevent gasoline line freezing. In the spring, summer and fall add 12 ounces to tank to complete tune-ups. Add 12 ounces every 1,000 miles to keep fuel system free of carbon, gum and sludge. To free sticky valves and to clean already formed carbon, idle motor at approximately 1500 RPM and pour product slowly into carburetor until motor stalls. Restart motor after 20 minutes.

Material Safety

Warning: poisonous and flammable. May be fatal or cause blindness if swallowed.

Vapor harmful. Keep out of reach of children. For industrial & institutional use only. In case of contact with eyes, flush with water. If swallowed, induce vomiting (give a tablespoon of salt in glass of warm water). Repeat until all vomit fluid is clear. Call physician immediately.

[Back to Section 1 - Automotive Maintenance Products - Miscellaneous]