Floor Degreaser

Description

A concentrated oil and grease solvent and emulsifier. Penetrates, dissolves and flushes away dirt from machinery, floors and equipment. Floor Degreaser will not flash ignite below its boiling point (210^oF.) and is self exinguishing.

Technical Information

Directions

Spray or mop emulsion degreaser over concrete surface to be cleaned. If grease build up is thick, score with a wire brush and mix intimately with cleaner. Allow to sit for 10 minutes then hose off with a stream of water under pressure. Can also be used as a presoak or pretreat prior to cleaning with steam. Scrape off any thick grease before treatment.

Material Safety

Avoid contact with skin and eyes. For contact with skin, flush with water. For contact with eyes, flush with water for 15 minutes and seek medical attention. If swallowed drink two glass of water and induce vomiting. Seek immediate medical attention. After vomiting, give water, milk or solution of sodium bichromate in water (1 teaspoon per quart). Do not give anything to an unconscious or convulsing person. Caution, contains heavy aromatic naphtha.

[Back to Section 2 - Concrete And Masonry Maintenance Products - Concrete]