All Purpose Bathroom Cleaner

Description

All Purpose Bathroom Cleaner contains no abrasives or acid. It should be diluted with water prior to use except in extreme cases of built up scum. Can be used on marble, terrazzo, porcelain, Formica, pre-cast stone, chrome, stainless steel, masonry, ceramic, quarry tiles (glazed or unglazed). It is an excellent remover of dulling soap, lime and organic residue and leaves a sparking crystal clean surface.

Technical Information

Appearance: Blue Liquid Solubility: 100%
Solids: 13.0% Odor: Mild
Density: 8.8 Lbs./Gal. pH Level: 11
Stability: Good Flash Point: None

Directions

Light Cleaning: (1-40 ratio): 3 ounces to 1 gallon water. General Cleaning: (1-30 ratio): 4 ounces to 1 gallon water. Heavy Cleaning: (1-20 ratio): 6 ounces to 1 gallon water. A higher concentration may be necessary to clean extreme soil conditions. Brush or mop the diluted product onto surface. Allow 2 to 4 minutes dwell time before scrubbing. Remove cleaning solution promptly and rinse surface thoroughly with clean water. For best results, change rinse water often.

Material Safety

Avoid contact with skin and eyes.

[Back to Section 4 - Custodial and General Maintenance Products - Cleaners]