Rust Converter


Halts existing rust and prevents future corrosion with a durable protective barrier. No need for sand blasting or scrapping. Coverage is approximately 50 square feet per gallon. Rust Converter is a surface conditioner and primer that changes rust into a dark protective polymer coating. It chemically converts existing rust into an inert coating that seals out moisture to prevent future rusting. The black polymer coating withstands weather, sun, water and salt spray without peeling or cracking - even without painting. This Rust Converter is an excellent primer for any type of paint. Protect iron and steel surfaces quickly and easily with chemical rust conversion.

Technical Information

Appearance: Tan liquid Solubility: 100%
Biodegradability: Yes Odor: Mild
Density: 9.1 Lbs./Gal. pH Level: 4.0
Flash Point: None Stability: Good
Foaming: None


Shake or stir well before using. Remove any large scale particles with a brush or hammer and clean the surface of grease and dirt. Apply this rust converter by brushing, rolling or spraying. The coating will dry to a smooth and darkened finish in 20 minutes. For optimum weather resistance apply a second coat 24 hours after the first coat has dried. Application equipment should be cleaned immediately after use with soap and water.

Material Safety

Do not apply this product to surfaces when temperatures are below 50oF. Do not return used material back into the original container. Keep from freezing. Product is harmful if swallowed. Contains tannic acid. Avoid prolonged or repeated contact with the skin. In case of eye contact flush with cool water for 15 minutes. If irritation persists, seek medical attention. Wash skin well after usage. If ingestion occurs, drink large amounts of water and induce vomiting.

[Back to Section 7 - Metal Cleaning, Maintenance and Paint Removal Products - Rust Control]