When mixed with kerosene or safety solvent, this degreaser will penetrate and dissolve grease oil and shop soil from metal and other surfaces. It emulsifies to forms a mixture that is readily washed off with water. The product can be used full strength or can be diluted with kerosene, mineral spirits or safety solvent. Contains no free alkali, acids or abrasives. Non-injurious to old paint and will not stain or cause corrosion when used as directed.
|Appearance: Tan Clear Liquid||Solubility: Emulisifable|
|Density: 6.70 Lbs./Gal.||pH Level: 7 (when emulsified)|
|Odor: Mild Solvent||Foaming: Some|
|Flash Point: 105oF||Stability: Stable|
Painted Floors: Apply with brush or mop at 1 part to 10 parts water. Cold Tank Cleaning of Motors, Parts, and Tools: Immerse in tank or agitate in washer. Add one part Engine Degreaser to 4 to 6 parts kerosene or safety solvent. Rinse with water. Motor Chassis Cleaning: Brush or spray on. Inhibits rust and will not corrode. Mix 1 part to 4 to 6 parts kerosene or safety solvent. Hose off with water.
Contains mineral spirits. Combustible liquid, keep away from heat, sparks and flame. Avoid contact with painted and finished surfaces. Avoid contact with skin and eyes. Use in well ventilated areas.Non-injurious to paint that is not affected by mineral spirits. Safe on rubber wiring and bushings if not exposed to solution for long periods of time.
[Back to Section 1 - Automotive Maintenance Products - Cleaners]