10% Acid Bowl Cleaner


10% Acid Bowl Cleaner is a ready to use formulation that is designed to remove stubborn stains, scale, and scum. It works especially well on lime deposits, hard water scale, rust, soap residue, uric acid salts, mold and mildew stains.

Technical Information

Appearance: Yellow or Clear Liquid Odor: Strong Acid
Solubility: Complete Stability: Stable
Density: 8.55 Lbs./Gal. pH: <1
Flash Point: None


Use bowl brush or mop to remove water from bowl by forcing over trap. Press brush or mop against side of bowl to remove excessive water from application. Apply 1 – 2 ounces of 10% Acid Bowl Cleaner evenly onto surface to be cleaned. Swab entire surface area especially under the rim where outlets are located. Allow cleaner to remain on surface for several minutes. Flush toilet and rinse brush or mop.

Material Safety

Corrosive Contains: Hydrochloric Acid. Can cause severe burns to skin, eyes, and internal organs. For industrial use only by trained personnel. Avoid contact with skin, eyes, and clothing. Do not take internally. Check gloves to insure no pinholes are present. Contact with diluted material cleaner may not cause immediate pain, redness, or burning until several minutes have elapsed.

[Back to Section 4 - Custodial and General Maintenance Products - Cleaners]