Sand, Silt and Mud Remover

Description

A formulation designed to promote the coagulation and settling of silt and sludge from streams, ponds and sewage treatment plants. Will act to clarify water and accelerate drying and digestion of sewage sludge. This product is non-toxic.

Technical Information

Appearance: Clear Liquid Solubility: 100%
Viscosity: Syrupy Odor: Very Slight
Density: 8.37 Lbs./Gal. pH Level: 7.0
Shelf Life: 2 Year Minimum Toxicity: None

Directions

For use in filtration beds: Spray over filtration bed at a rate of 1 quart to each 500 to 1,000 gallons of silt filled water. If dripped into waste stream, apply at a rate of 2-5 ppm at one or several stages. Will not harm fish or plant life.

For use in ponds and lagoons: 2 to 5 gallons per 1,000,000 gallons of capacity will provide a long lasting treatment that will reduce muddiness in lagoons and ponds. If the area to be treated is fed by a dirty stream, it would be more effective to apply to the incoming water.

Material Safety

Non-toxic to sewage digestion bacteria and micro-organisms.

[Back to Section 4 - Custodial and General Maintenance Products - Cleaners]